There are 66 products.
The whole milled BLACK clamps (anodized) are made of high-strength aluminum alloy with subsequent protective coating and heat treatment.
This device helps to take pictures of the blade with magnification up to 500x. Share your experience in sharpening knives, discuss the results of sharpening with colleagues, take pictures of a perfectly sharp blade, compare different sharpening techniques, abrasives and sharpening devices.
Three radius adapter: 4.3 °, 7.2 °, 10.7 °
The Sharpener stand is a metal base holding the sharpener on the working surface of the table or workbench.
The standard single K02 clamp. Mnimum width of the knife is 20 mm, the thickness in the spine is 5 mm, the range of angles is 10-32 degrees
Diamond bar of Russian production from the Venev diamond tools factory. Unlike abrasive stones diamond bars are much less worn out so they are recommended to work with hard steels.
Equipment: Tempered glass, a set of 4 types of silicon carbide grinding wheels (80, 230, 400, 600 grit.), Silicone legs 5 pcs.
Glass size: Diameter 300 mm, thickness 10 mm.
It is considered universal due to its diameter.
It is suitable for leveling and fine-tuning most abrasive stones, with silicon carbide powder.
Increased thickness of the spring provides exceptional clamping stability. They are intended for operations with the raised loading (for example at roughing operation on firm steels).
The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels).