Filter By

Categories

Categories

Weight

Weight

  • 0.05kg - 0.45kg

Price

Price

  • $5.00 - $59.00

Active filters
  • Categories: TSPROF
$13.80
$17.80
$24.20
$19.80
$17.80
$33.00
$34.80
$5.00
$19.00
$17.40
$27.60
$59.00

Gloves are made of high molecular weight polyethylene, widespread in mountaineering.

Stronger than Kevlar.

$13.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 220 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$17.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 600 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$24.20

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 320 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$19.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 150 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$17.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 800 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$33.00

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 1200 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$34.80
Wooden handle for the abrasive holder
$5.00

Stone Size: 150 × 25 × 6mm
Grain: F320
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works both  with oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from the TSPROF store, in this case, as a rule, it is preferable to oil. Setting of the stone is carried out on glass with silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$19.00

Stone Size: 150 × 25 × 6 mm
Grain: F150
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works with both oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from the TSPROF store, in this case, as a rule, it is preferable to oil. Flatting of the stone  is carried out on glass with  silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$17.40

Stone Size: 150 × 25 × 6mm
Grain: F800.
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works with both oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from TSPROF store, in this case, as a rule, it is preferable to oil. Alignment of the bar is carried out on glass, on silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$27.60
Ceramic Honing Rod TSPROF is a reliable assistant for dressing the cutting edge of the knife, which is suitable for any metal grade of any hardness, as well as for ceramic knives.  Ceramic Honing Rod has a hard, smooth surface and is suitable for knives up to 28 cm long, and due to the increased radius the greatest contact with the cutting edge is provided.

Characteristics:

Material of Rod: Ceramics
Work surface length: 250 mm
Handle length: 132 mm
Hardness: 8 units Mohs
Diameter: 14mm
Weight: 250g.




$59.00

Loading...



No more pages to load

0
0