Active filters
$30.00
$132.00
$143.00
$27.60
$17.40
$19.00
$34.80
$33.00
$17.80
$19.80
$17.80
$24.20
Boride PC (Polisher's Choice) - a series of synthetic stones made of aluminum oxide of the highest quality. The name of the stones literally translates as "Polisher's Choice." The company Boride for a reason called this series. The PC series stones are designed as finishing stones for the final refinement of metal to a mirror finish.
$30.00
CS-HD - a series of synthetic stones made of silicon carbide, characterized by a thinner and sharper grain, which allows you to quickly form a cutting edge. The solid structure allows you to easily work on any type of steel with a hardness of 47 to 63 HRC.
All stones are delivered glued to forms indicating the name of the stone and grit.  The protective bag is also coming with the kit.
$132.00
T2 series stones are made of aluminum oxide and use a very strong bond. As a result, these stones are high performance and their wear rate is below average. Boride T2 is recommended for working with stainless steel.

Gritness: F150, F220, F320, F600, F800, F1200

Boride stones should be used with one of these lubricants:

  • Refined olive oil
  • Oleic aсid
  • TSPROF Liquid for abrasive stones


$143.00

Stone Size: 150 × 25 × 6mm
Grain: F800.
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works with both oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from TSPROF store, in this case, as a rule, it is preferable to oil. Alignment of the bar is carried out on glass, on silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$27.60

Stone Size: 150 × 25 × 6 mm
Grain: F150
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works with both oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from the TSPROF store, in this case, as a rule, it is preferable to oil. Flatting of the stone  is carried out on glass with  silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$17.40

Stone Size: 150 × 25 × 6mm
Grain: F320
Material: Silicon Carbide

Recommendations for work: Boride CS-HD series works both  with oil and water coolants. To increase the productivity of the rough stone grinding process, it is recommended to use coolant with a low density, water or a specialized coolant from the TSPROF store, in this case, as a rule, it is preferable to oil. Setting of the stone is carried out on glass with silicon carbide powder. During operation and when cleaning from salting, the use of household detergents is allowed.

$19.00

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 1200 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$34.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 800 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$33.00

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 150 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$17.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 320 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$19.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 220 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$17.80

Stone size: 25 × 6mm. (1/4 * 1 * 6 ")
Grain: 600 grit.
Material: Alumina

Recommendations for work: In sharpening with Boride stones of the T2 series and their maintenance there are no special deviations from the general recommendations and regulations. When sharpening, coolant can be used both on oil and on a water basis. The stone is cleaned of impurities in water using a stiff brush and soap solution. Stones are leveled on thick glass or a mirror using silicon carbide powder.

$24.20

Loading...



No more pages to load

0
0