There are 6 products.
Size: 160x25x11 mm.
It is used for finishing the knife, polishing, and deburring. The form can be used both clean, for deburring, and with diamond pastes. Foк finishing the knife, pre-apply diamond paste on the blank and grind.
To remove the diamond paste from previous use, polish the blank on sandpaper with a grit of 1200.
Leather blank is intended for blade edge final polishing. Leather softening blade edge and strengthen it. Working surface made of soft high quality leather glued to tough aluminium blank. Dont work against cutting edge. Length 150mm, width 25mm, leather thickness 3mm, blank thickness 3mm.
The leather blank is intended for final finishing of the cutting edge of the knife.
Gray one - for stainless steel, it has a coarse grain; White one - finishing for all kinds of metals. Aluminium oxide. 20/32 μm Recommended for use with leather letterhead.
No more pages to load