Double-sided diamond stone, (S), 3/2-1/0 (OSB), 100%

Diamond bars manufactured by Venev Industrial Diamonds Inc. Unlike abrasive stones, diamond bars wear off much less, so it's recommended to use them with hard steels. Suitable for Blitz standard abrasive holder. The 20/14 side is made on an improved organic OSB bond. This is a modernized bond, which is based not on a grinding powder, but on a micro-powder of the ACM brand, made of synthetic diamonds of normal abrasive capacity. The difference between the OSB bond and others is that it does not use boron carbide. In addition, the abrasive layer on it is not sintered, but is glued to the body of the metal plate. The absence of unnecessary inclusions of other abrasives makes it possible to do softer and finer work. OSB bond is ideal for hard steels at small angles.

The sides are marked with the gritnes according to the state standard scale.

Stone size: 150x24x11 mm
Grain size 1 side: 3/2 microns
Grain size 2 side: 1/0 microns
Diamond powder concentration: 100%
Diamond layer thickness: 3 mm

Recommendations for work: sharpen with soap foam or water. To clean the bar from glaring, use water and a brush. Don't require leveling.
These stones are suitable for Blitz and Blitz 360 knife sharpeners. For using them with Blitz you'll need to buy universal stoppers in addition.