Triple-coated diamond bar 100/80
Article:
TS-SH2000942
Triple-coated diamond bar 100/80
More Info
All customers are responsible for import / duty fees
Dear Customers.
At this time our website is running in catalog mode. Retail sales are only available for Europe and the United States. You can also buy our products from our dealers.
If you have any questions please contact our support sales@tsprof.com
Dear Customers.
At this time our website is running in catalog mode. Retail sales are only available for Europe and the United States. You can also buy our products from our dealers.
If you have any questions please contact our support sales@tsprof.com
Description
Diamond stone 100/80 made on a galvanic bond. Diamond plates on galvanic bond provide intensive metal removing and can be used for the cutting edge with significant damage (chips, bends etc.).
They work much more aggresively than stones on organic or metallic bond with the same grain size. It's achieved by protruding diamond grains, whereas grains in organic or metallic bond are sunk in the binder and mixed with it. The stone contains triple diamond coating, which is presented on both sides of the stone, gritness on both sides is the same. The grain concentration in a layer is 100%. Both sides have smooth geometry and don't require levelling, diamond layer breaks by working.
The stone is intended for rough knife sharpening.
Characteristics:
Length: 150 mm
Width: 20 mm
Height: 3 mm
Powder gritness (microns): 100/80
Powder brand: АС15
Work recommendations: wet the stone before working. Moisten the stone during the sharpening with warm water with brush, prevent glaring. Not intended for working with oil. After finishing work clean the stone with warm water. Maintain in a dry place.
They work much more aggresively than stones on organic or metallic bond with the same grain size. It's achieved by protruding diamond grains, whereas grains in organic or metallic bond are sunk in the binder and mixed with it. The stone contains triple diamond coating, which is presented on both sides of the stone, gritness on both sides is the same. The grain concentration in a layer is 100%. Both sides have smooth geometry and don't require levelling, diamond layer breaks by working.
The stone is intended for rough knife sharpening.
Characteristics:
Length: 150 mm
Width: 20 mm
Height: 3 mm
Powder gritness (microns): 100/80
Powder brand: АС15
Work recommendations: wet the stone before working. Moisten the stone during the sharpening with warm water with brush, prevent glaring. Not intended for working with oil. After finishing work clean the stone with warm water. Maintain in a dry place.
Features
|
Manufacturer
|
TSPROF Sharpening |
Reviews (0)
Ask a question
