TSPROF Blitz Fine F600 Diamond Plate

Diamond plates on galvanic bond provide intensive metal removing and can be used for the cutting edge with significant damage (chips, bends etc.).

The diamond plate F600 Fine is used for pre-finishing of the cutting edge and removing of the marks, left by the previous stones.

These abrasives work much more aggresively than stones on organic or metallic bond with the same grain size. It is achieved due to the protruding diamond grains, whereas grains of the organic or metallic bond get stuck in the binder and mixed with it. The grain concentration in a layer is 100%. At the same time, it should be noted that in terms of the duration of work, such plates will be inferior to plates on other bonds due to a thin layer of spraying, which is actively erased during the sharpening process.

You also should remember, that by working with soft steels (up to 58 HRC) these diamond stones will work out faster than by working with harder steels.

Diamond stones on galvanic bond don't require preparing for work (levelling,  etc.).

Abrasive dimensions: 4х25х150 mm
Gritness: 600 grit (FEPA-F)