TSPROF К03 Lite Base Sharpening Kit

The Lite kit — is an upgraded K03 Pro sharpener, with an abrasive holder without Axicube. The holder guide is an H7-tolerance grade calibrated steel rod. The strict dimensional tolerances of this guide rod will allow the high precision Axicube-i angle finder to be installed separately on the Lite version. The K03 Pro requires no calibration and is assembled in a couple of minutes.

The K03 Pro version of the body has no horizontal deviations, the knife is clamped parallel to the table. The modern rack and pinion lift, with a toothed rack gearing and stepless angle adjustment, allows setting of the angle with a 0.1° accuracy. The slide is driven by a brass toothed wheel and the steel-brass pairing ensures smooth movement. Body with an increased sharpening angle, due to the improved design, will allow you to sharpen knives in the range of angles from 7° to 39° and to the overall angle of up to 78°.

The sliding part is connected to the base by a dovetail, which guarantees absolute precision of the angle setting. An additional locking screw allows the lift to be rigidly locked during deburring operations. An additional lifting rod is used to increase the angle of sharpening. Fixing its position is now more convenient: the fixing screw can be installed on both sides of the body. The response part of the lift is made of a durable polymer material - polyacetal. It is a super strong and high performance polymer with a density of 1.420 g/cm3. Polyacetal has excellent antifriction properties, providing excellent smooth running of the rack and pinion lift. The polymer is black, highly wear and abrasion resistant. It retains its initial appearance and smooth shiny surface for a long time. The slider is fastened through a dovetail connection, which eliminates backlash of the mechanism during operation, which could affect the quality of sharpening. A steel rail is responsible for the operation of the lifting mechanism. Angle measurement scale is applied on the front side of the slide and allows you to visually control their setting.

The unique rotating mechanism has a wide lever that facilitates rotation and provides secure auto-locking of the clamping frame. Thanks to a spring and bearing system, the frame turns over without wear on the mechanism. The body of the auto-rotate system is made of durable aircraft-grade aluminum, with black anodizing.

The universal abrasive holder allows you to use the sharpener with any abrasive stone, both with and without blanks. The abrasive holder bar has an increased length of 694 mm, is made of steel and has high rigidity. The holder rod is collapsible and is connected by an aluminum sleeve-coupling with a "three-point" mounting, which gives maximum alignment of the connection. The rod is equipped with a handy thumbscrew for adjustment, and is connected in one motion. Equipped with a steel backing.

Whole-milled clamps, made of high-strength aircraft-grade aluminum. This type of clamp provides the greatest rigidity and stability of the unit. Thanks to the monolithic design of the clamps, their main advantage is the increased resistance to abrasive pressure, which ensures a constant angle during all phases of work, from roughing to finishing. No calibration or adjustment to different blade shapes is required when working with this type of clamps. They have a simple and convenient principle of clamping (using a single key) and allow you to clamp a wide variety of knives, including knives with bevels from the spine, folding, kitchen, hunting, etc.

The TSPROF steel stand weighing more than 3 kg securely holds the device on the table and allows sharpening on any flat surface.

K03 Lite includes:

К03 Pro body

Whole-milled clamps - 2 pcs

TSPROF Steel Stand

Spare parts

Packaging: wooden box