TSPROF Kadet Pro XL kit

TSPROF Kadet Pro Sharpening Kit has everything for the highest quality sharpening: a knife rotation mechanism, the ability to set any angle from 9° to 28.5°, rigid construction, and absolute precision in every detail.

Kadet Whole-Milled Fillet Clamps - are designed for fixing knives with a spine thickness of up to 3.5 mm. They are suitable for kitchen and fillet knives with a narrow spine, keychain knives, straight razors, knives with "scandi-bevels" , etc. Recommended blade length: 30-200 mm.

TSPROF Double clamp securely holds any shape of the blade, thanks to the jaws that can be adjusted to fit the planes of the knife. Suitable for chef's, table, fillet, universal, carving, vegetables and kitchen knives with a narrow spine. However, unlike a single clamp, double clamp jaws are more narrow - 16 mm wide, so we do not recommend to clamp knives with a spine larger than 3.5 mm. Recommended knife length: 30-300 mm.

TSPROF Single Clamp -  allows to clamp knives with complex blade geometry. Good for hunting and folding knives with a wide blade. Minimum width of the knife is 20 mm, maximum spine thickness is 5 mm, range of angles is 10-32 degrees (for wide knives the range may differ). Recommended blade length: 50-200 mm.

TSPROF Single Fillet Clamp - a special clamp for narrow fillet knives, with a reduced sharpening angle. The thin jaws of the clamp are made of structural spring steel which allows the clamp to be adjusted to the blade geometry. Possible to sharpen: knives such as Victorinox, small, folding, keychain knives and other narrow and short knives. Recommended blade length: 50-200 mm.

TSPROF Convex Mini attachment - is easily mounted on the abrasive holder using an internal fixing screw, allows you to create a convex grind and provides a maximum offset of the sharpening angle of 11.2°.

L-attachment is designed for mounting the K03 and Kadet clamps on the turning frame. You can set the clamps with the attachments on the edges of the frame and increase its overall length by 4 cm. This extends the clamping options for knives with long blades or with thin and flexible blades. You can set the clamps in the center of the frame and thus create a single clamp for sharpening the shortest blades. The attachment is suitable for turning frames of K02 (produced in 2018), all versions of K03, and all versions of Kadet.

Abrasive Holder Stroke Limiter 6 mm - designed to limit the movement of the abrasive holder and prevent damage to the blade.

TSPROF Kadet Pro XL kit includes:

• Kadet Pro Sharpening kit;
• Kadet Whole-Milled Fillet Clamps;
• Double clamps;
• Single Clamp;
• Single Fillet Clamp;
• Convex Mini Attachment;
• L-attachment For TSPROF Clamps;
• Abrasive Holder Stroke Limiter 6 mm.