Fillet whole-milled clamps kit (2 pcs.)

Designed for sharpening fillet-knives, multi-tools, Scandinavian type knives, up to 3.5 mm thick.
Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side.
$97.00
Quantity
Designed for sharpening fillet-knives, multi-tools, Scandinavian type knives, up to 3.5 mm thick.
Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side.
Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a minimum thickness of the jaws, without loss of wear resistance. The width of the clamps is selected in such a way as to allow you to install up to 4 clamps simultaneously on the frame to securely fix even the most flexible fillet-knife.
The clamps do not require calibration and are clamped by tightening just one screw.
Minimum sharpening angle: 7.2°
Recommended knife length: 30-300 mm
Minimum width of a knife: 10 mm
Jaws thickness: 1 mm
Clamp width: 21 mm
The maximum thickness of the spine: 3.5 mm

For the screwdriver: 2.5 mm.

7,2° can be reached if:

knife's spine thickness 1мм and overhang from 12мм
knife's spine thickness 1,5мм and overhang from 16мм
knife's spine thickness 3,5мм and overhang from 23мм
0О-00006067

Specific References

Related Products

0
0